Herus

The perfect companion to anyone who enjoys music, it fits perfectly in your laptop bag or pocket, and replaces the functionality of the soundcard normally found in a laptop or desktop computer.

Experience your music the way it was meant to be heard, without all the noise generated by the circuitry in your computer.

Our clinic is fitted with Resonnessence Labs Products and couldn't be happier. Our patrons love having a meditation room that presents a calm and stress reducing environment supplemented with high-fidelity music played at 432HZ.

All Resonessence products feature upgradable firmware and hardware and despite its physically small size, It also contains Resonessence upgradable hardware and firmware.

This product is our smallest form-factor, audiophile quality USB to Headphone DAC. It uses the USB Audio 2.0 Asynchronous protocol and supports DSD64 and DSD128 as well as high data rate PCM at 24bits up to 352.8Ks/S.

It is a USB powered device that achieves more than 100dB of SNR, (typically 108dB) and is capable of driving 2.4V RMS, (ie 6.8V pk-to-pk) into headphones from 600 Ohms to 32 Ohms. The distortion in all cases is better than 0.005% (85dB): the measured THD+N is typically 89dB for 32 Ohms and 90dB (about 0.003%) for 600 Ohms

This product is designed to operate with MS Windows, MAC OS and Linux. You may download our Thesycon USB Audio 2.0 driver to enable USB Audio 2.0 on Windows. This product uses the ESS 9010-2M DAC, our custom code, and our own asynchronous algorithms that run in a generic Cypress USB interface chip.

We use Resonessence designed, advanced power line processing circuits that can reliably deliver more voltage range than the USB provided 5V, and we maintain the SNR of the power supply to a degree such that This product exhibits well over 100dB of SNR at the headphone output. This product also has a very low 0.2 Ohms output impedance that prevents external noise sources coupling into the output.

All Resonessence products feature upgradable firmware and hardware and despite its physically small size, This product also contains Resonessence upgradable hardware and firmware.

This product is machined from a solid block of aluminum and is 63.5mm (2.5in) long, by 31.7mm (1.25in) wide and 19mm (0.75in) high. It has just two connectors: a USB type ‘B’ socket on one end and a TRS 1/4inch Stereo Headphone connector at the other end. This product, like all Resonessence products is Designed, Manufactured, Tested and Shipped in Canada.

This product also has a very low 0.2 Ohms output impedance that prevents external noise sources coupling into the output. All Resonessence products feature upgradable firmware and hardware and despite its physically small size, This product also contains Resonessence upgradable hardware and firmware.

Love the portability and ease of use.‍- Personal OBYGN Clinics in Scottsdale and Phoenix

A best seller in our store for DAC players.‍- Custom Phone Shop in Arizona

Hemrus